Contract · Federal
Repair Punta Borinquen Lighthouse at USCG Base Borinquen, Aguadilla, Puerto Rico (PNUM 2993811)
HOMELAND SECURITY, DEPARTMENT OF / US COAST GUARD Aguadilla, PR
- Status Open, no deadline listed
- Amount Amount not listed
- Set-aside Historically Underutilized Business (HUBZone) Set-Aside (FAR 19.13)
Scope
PRE-SOLICITATION NOTICE: THIS PROJECT IS BEING SET ASIDE FOR TOTAL HUBZONE BUSINESS CONCERNS.
IT IS ANTICIPATED THAT THIS SET ASIDE WILL BE SOLICITED VIA INVITATION FOR BID (IFB).
THE SOURCES SOUGHT THAT WAS POSTED FOR THIS PROJECT IS AS FOLLOWS: PN 2993811 – REPAIR PUNTA BORINQUEN LIGHTHOUSE AT UNITED STATES COAST GUARD BASE BORINQUEN, AGUADILLA, PUERTO RICO.
This is not a pre-solicitation notice or solicitation for proposals/quotations.
The base bid, on-site work consists of furnishing all labor, tools, equipment, materials, supervision, and transportation necessary for, and incidental to, Repair Punta Borinquen Lighthouse.
The following is a general summary of the work: Develop and provide asbestos containing material (ACM) and lead based paint (LBP) investigation and analysis report.
Prep surface with a combination of high-pressure water and spot washing with a stiff brush and cleaning solution on 3,200 square feet (SF) of exterior surface at the Punta Borinquen Lighthouse.
Prep surface with a combination of high-pressure water and spot washing with a stiff brush and cleaning solution, as well as strip LBP within interior walls and metal stairway (2,560 SF).
Repair spalling damage on the exterior wall and overhang on Punta Borinquen Lighthouse.
Apply minor repairs to 160 square feet damaged areas, cracks, and unsound surface of exterior surface by dry cutting and patching.
Repair rust damage on roof level and replace one two-square feet metal hatch access to roof, as we; as install 45 linear feet of metal guardrails along the roof edge.
Replace a five feet 10 inches wide and nine feet six inches high entrance metal door to match existing on the Punta Borinquen Lighthouse.
Replace a two feet six inches by three feet three inches metal louver window on first level to match existi...
Typical award value
What contracts like this typically pay
est. $64K-$994K
This is not this contract’s value. It’s what the government has actually paid for comparable work in the past. How we estimate this.
Timeline
-
Posted
Oct 26, 2026
-
Status
Open now
How to bid on this
This is a contract solicitation, not a grant. To bid, you submit a proposal (usually a price and a description of how you would do the work) directly to the government, through the channel the official listing specifies, not through Oppward.
- Make sure your business has an active SAM.gov registration. You cannot be paid on a federal contract without one.
- Read the full solicitation on the official listing above, especially the scope of work, not just this summary. Our guide to reading a solicitation walks through what to look for.
- Check the set-aside listed above and confirm your business actually qualifies for it before you spend time on a proposal. See our guide to set-asides if the category is unfamiliar.
- Submit your proposal by the deadline, using the exact submission method the official listing states. A technically on-time bid sent the wrong way is often treated as late.
Read our guide: Government construction and trades contracts: how they work
Get contracts like this one matched to your business, free.