Contract · Federal
Airfield Blast Shield
DEPT OF DEFENSE / DEPT OF THE AIR FORCE Dyess AFB, TX
- Status Closes in 5 days
- Amount Amount not listed
- Set-aside Small Business Set Aside - Total
Scope
Amendment 0001 (13 Oct 2026): The purpose of this amendment is to • Extend the Proposal Due Date to 27 October 2026. • All other solicitation requirements remain unchanged and in full effect.
1.1 PROJECT DESCRIPTION: 1.1.1 Work under this project shall consist of providing all plant, labor, equipment, appliances, materials, and performing all operations required to cover the fabrication and erection of new Blast Deflector Fences for the B1-B.
All work shall comply with the contract specifications and shall be in accordance with the latest International Building Code (IBC), National Fire Codes, Unified Facilities Criteria (UFC), Engineering Technical Letters (ETL’s), and all applicable Federal, State and local regulations/codes.
2.1 GENERAL: 2.1.1 The blast deflector shall be of the curved, non-perforated, galvanized, corrugated type, with corrugations running in a horizontal direction.
The Lynnco Type GS-20-2 as manufactured by Blast Deflectors, Inc shall be considered as the standard for this work.
At the option of the Contracting Officer, alternate types of blast deflectors may be considered provided the drawings and specifications of alternate types are approved by Contracting Officer.
The blast fence shall be furnished and installed by a manufacturer/contractor with blast fence experience.
The blast fence shall be capable of withstanding the afterburner throttle at 30,000 lbs thrust of a B1-B Bomber engine nozzle 90 ft/ (min.) from front of deflector foundation.
Extrapolated temperature is approx.
1400 ? velocity @ 900 MPH.
2.1.2 Haul Route: Approved haul route is from the Tye Gate, Third Street, Ave E, Second Street, to Flightline.
Haul Route subject to change based on Flightline Restrictions.
Contractors are required to use the Tye Gate for all access.
2.1.3 Construction Stora...
Typical award value
No award history yet for this category (NAICS 238120).
Timeline
-
Posted
Oct 13, 2026
-
Listing updated
Oct 20, 2026
-
Status
Closing soon
How to bid on this
This is a contract solicitation, not a grant. To bid, you submit a proposal (usually a price and a description of how you would do the work) directly to the government, through the channel the official listing specifies, not through Oppward.
- Make sure your business has an active SAM.gov registration. You cannot be paid on a federal contract without one.
- Read the full solicitation on the official listing above, especially the scope of work, not just this summary. Our guide to reading a solicitation walks through what to look for.
- Check the set-aside listed above and confirm your business actually qualifies for it before you spend time on a proposal. See our guide to set-asides if the category is unfamiliar.
- Submit your proposal by the deadline, using the exact submission method the official listing states. A technically on-time bid sent the wrong way is often treated as late.
Read our guide: Government construction and trades contracts: how they work
Get contracts like this one matched to your business, free.