Contract · Federal
Maintenance, Repair and Preservation of IX-551
DEPT OF DEFENSE / DEPT OF THE NAVY BREMERTON, WA
- Status Closes in 6 days
- Amount Amount not listed
- Set-aside None (open competition)
Scope
The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair, and preservation of IX-551.
The IX-551 characteristics are Length: 260 FT, Width: 85 FT, Age: 10 Years, Hull Type: Steel, Draft: 8 FT 6 IN, Full Displacement: 3,070 L Tons and Light Load: 2,267 L Tons.
The Contractors facility must possess the capability of IX-551 with the dimensions as stated above.
To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region.
For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA.
Scope Overview: Coordinate with the Contracting Officer, via the SUPERVISOR to deliver the Asset to the Contractors facility.
Upon docking the Asset, wash, and clean the exterior surfaces of the Asset.
Blast and preserve all exterior hull surfaces, underwater body, freeboard, moon pools and bulwark surfaces of the Asset.
Fill, drain, air test, inspect each underwater skeg on the Asset.
Accomplish visual inspections of hull and body and all tank/voids.
Remove existing and install new zinc anodes and hardware on the underwater hull.
Shift the Asset on the blocks to achieve 100 percent preservation of underwater hull.
Apply non-skid system to main deck and 02/03 level decks.
Accomplish preliminary and final air tests to tanks/voids.
Open, pump, ventilate, gas free and clean all tanks.
Accomplish partial preservation of Qty (24 EA) tanks.
Preserve tank/void manhole covers.
Identify distinguishing figures and markings, Remove, clean and reinstall rubber fenders.
Open and inspect all pumps and overboard discharge valves.
Accom...
Typical award value
No award history yet for this category (NAICS 336611).
Timeline
-
Posted
Sep 21, 2026
-
Listing updated
Oct 20, 2026
-
Status
Closing soon
How to bid on this
This is a contract solicitation, not a grant. To bid, you submit a proposal (usually a price and a description of how you would do the work) directly to the government, through the channel the official listing specifies, not through Oppward.
- Make sure your business has an active SAM.gov registration. You cannot be paid on a federal contract without one.
- Read the full solicitation on the official listing above, especially the scope of work, not just this summary. Our guide to reading a solicitation walks through what to look for.
- This listing has no set-aside restriction ("full and open competition"), meaning any business, large or small, can bid.
- Submit your proposal by the deadline, using the exact submission method the official listing states. A technically on-time bid sent the wrong way is often treated as late.
Get contracts like this one matched to your business, free.