Contract · Federal · Small Business Set Aside - Total

140-ton 10-foot Hydraulic Press Brake

Agency: DEPT OF DEFENSE / DEPT OF THE ARMY
Location: Great Falls, MT
Amount: Amount not listed
Posted: Sep 9, 2026
Set-aside: Small Business Set Aside - Total
NAICS code: 333517 look up NAICS codes
PSC code: 3441

Timeline

Posted

Sep 9, 2026
Status

Closing soon

What contracts like this typically pay

No award history yet for this category (NAICS 333517).

What this contract is for

Agency: DEPT OF DEFENSE / DEPT OF THE ARMY
Location: Great Falls, MT
Set-aside: Small Business Set Aside - Total
NAICS: 333517
Scope: Federal

Amendment 3 The purpose of this amendment is provide answers to questions that have been received up to 9/8/2026.

Category 1: Tooling & Material Specifications Material Types & Thickness: What are all the material thicknesses you intend to form (from thinnest to thickest)?

What are the specific types and grades of material you will be working with (e.g., A36 Mild Steel, 5052 Aluminum, 304 Stainless Steel)?

321 Stainless Steel 0.016 – 0.180 302 Stainless Steel 0.016 – 0.180 4901 Titanium 0.020 – 0.120 9046 Titanium 0.020 – 0.120 2024-T3 Aluminum 0.016 – 0.125 2024-T81 Aluminum 0.016 – 0.125 7075-O Aluminum 0.030 – 0.160 7075-T6 Aluminum 0.030 – 0.160 6061-O Aluminum Up To 0.125 (No other sizes are listed in our inventory) 7075-T651 Up to 0.250 (No other sizes are listed in our inventory) 5052-H43 0.020 – 0.375 Mild Steel 0.020 – 0.250 Tooling Configuration: For each material type and thickness, what is the required tooling configuration?.

What are the required V-opening sizes for the Multi-V Bottom Die?

Please provide specifics.

Selecting the correct V-opening (V) depends heavily on your material thickness (T) and type.

Mild Steel: formula: V = 8 × T Stainless Steel (Harder): typically V = 10 × T or 12 × T Aluminum (Softer): Often uses V = 6 × T for soft grades, or up to 10 × T - 12 × T for hard/T6 grades to prevent surface cracking.

What are the required punch dimensions and angles for the Gooseneck Punch?

Tip Working Angle: Ranges from 30°, 45°, 60°, 85°, 88°, to 90°.

Springback Target Angle: Usually 88° or 86° for air-bending standard 90° parts.

Outward Neck Angle: Ranges between 42° and 45° to provide relief clearance.

Clamping Method: The solicitation specifies "quick-release clamping." Please clarify the preferred method: a) Hydraulic Clamping Category 2: Machine Configuration...

Official solicitation and documents

The full solicitation, any attachments, and the actual submission instructions live on the official listing, not on this page. Oppward summarizes public record data; it does not host or mirror the source documents.

View the official listing on SAM.gov

Oppward is an independent service and is not affiliated with, endorsed by, or sponsored by SAM.gov or any government agency. This page is a plain-English summary of public record data; the linked source above is the authoritative listing.

How to bid on this

This is a contract solicitation, not a grant. To bid, you submit a proposal (usually a price and a description of how you would do the work) directly to the government, through the channel the official listing specifies, not through Oppward.

Make sure your business has an active SAM.gov registration. You cannot be paid on a federal contract without one.
Read the full solicitation on the official listing above, especially the scope of work, not just this summary. Our guide to reading a solicitation walks through what to look for.
Check the set-aside listed above and confirm your business actually qualifies for it before you spend time on a proposal. See our guide to set-asides if the category is unfamiliar.
Submit your proposal by the deadline, using the exact submission method the official listing states. A technically on-time bid sent the wrong way is often treated as late.