Contract · No Set aside used

Ultra-Wideband Digital Receivers

Agency: DEPT OF DEFENSE / DEPT OF THE NAVY
Location: WASHINGTON, DC
Amount: Amount not listed
Deadline: Closes in 6 days (Jul 24, 2026)
Posted: Jul 14, 2026
Set-aside: No Set aside used
NAICS code: 334290

What this contract is for

THIS IS A SOURCES SOUGHT NOTICE (SSN)/REQUEST FOR INFORMATION (RFI) AND NOT A SOLICITATION OR AN INDICATION THAT A CONTRACTUAL COMMITMENT WILL EXIST AS A RESULT OF THIS SSN. This announcement is not a formal Request for Quotes (RFQ). This SSN/RFI is for informational and planning purposes only and does not guarantee that an award will be made. Any quotes submitted in response to this SSN/RFI are not quotes on which an order will be issued. The Government assumes NO financial responsibility for any costs incurred. A solicitation package is not available at this time. However, should such a requirement materialize, no basis for claims against NRL shall arise as a result of a response to this SSN/RFI or NRL’s use of such information either as part of our evaluation process or in developing specifications or work statements for any subsequent requirement. LOCATION: Contracting Office Address: NRL, 4555 Overlook Avenue, SW, Washington, DC 20375 OBJECTIVE: Procure Ultra-Wideband Digital Receivers General Requirements: Following is a list of the salient characteristics of the required four channel wideband digital receiver: Four input channels Only independent tuning for each channel Input frequency range of 100 to 26,500 MHz Tuning resolution of 1 kHz steps at RF Noise Figure (30 dB Gain setting) of 17 dB max, 13 dB typical In Band Input 3rd order intercept point (20 dB Gain) of 0 dBm typical, -7 dBm min Input second-order intercept point of +40 dBm typical, +30 dBm min -20 - +60 deg C operating temperature range Ethernet remote access Analog Devices AD9694 Digitizer TI TMS320C6457 SOM Digital Signal Processor Input bandwidth selections of 100 MHz and 200 MHz Single 40 Gb I/Q Data Transport via QSFP+ port Size of 6.7” x 7.2” x 2.5” Approx weight of 6.5 lbs Power consumption o...

View the official listing on SAM.gov

Oppward is an independent service and is not affiliated with, endorsed by, or sponsored by SAM.gov or any government agency. This page is a plain-English summary of public record data; the linked source above is the authoritative listing.

How to bid on this

This is a contract solicitation, not a grant. To bid, you submit a proposal (usually a price and a description of how you would do the work) directly to the government, through the channel the official listing specifies, not through Oppward.

Make sure your business has an active SAM.gov registration. You cannot be paid on a federal contract without one.
Read the full solicitation on the official listing above, especially the scope of work, not just this summary. Our guide to reading a solicitation walks through what to look for.
Check the set-aside listed above and confirm your business actually qualifies for it before you spend time on a proposal. See our guide to set-asides if the category is unfamiliar.
Submit your proposal by the deadline, using the exact submission method the official listing states. A technically on-time bid sent the wrong way is often treated as late.