Contract · Federal
Pouch Converters Capable of Fabricating, Filling, Processing (via commercial sterilization) Group Sized Serving Pouches
DEPT OF DEFENSE / DEPT OF THE ARMY NATICK, MA
- Status Closes in 27 days
- Amount Amount not listed
- Set-aside None (open competition)
Scope
SYNOPSIS: This Sources Sought Announcement is to assist the US Army Combat Capabilities Development Command - Soldier Center (DEVCOM-SC) in identifying industrial sources and capabilities to fabricate, fill and process (via commercial sterilization) a Group Serving Pouch (GSP), which will be included in the U.S. military’s Group Ration Platform.
The Government requests responders submit a Broad Other Transaction Authority Announcement (BOTAA) preproposal as outlined in DEVCOM-SC BOTAA 22-01 located at: https://sam.gov/opp/126eaf3a78d847f69b7c94b606877f92/view.
Please refer to Topic Area of Interest “A.
SOLDIER SUSTAINMENT DIRECTORATE (SSD)” starting on page 19.
Submit the BOTAA preproposal to: [email protected] and [email protected] by December 18, 2026, by 5 PM EST.
Description: DEVCOM-SC is requesting preproposals on industrial sources and relevant capabilities pertaining to pouch fabrication, filling and processing of vegetable-based food components for use in Group Rations.
Specific Specifications: Capability to fabricate (or procure) GSPs, fill with vegetable and brine mixture, and commercially sterilize.
Volumetric size of the GSP shall be between 24 to 144 ounces.
Targeted shelf life of the pouch is 3 years at 80F Residual gas volume in the filled and sealed GSP shall not exceed 12% of the fill volume.
The material used for the pouch shall be generally recognized as safe (GRAS) for use with food in accordance with 21 CFR, Parts 170-199 or other standards and regulations.
The closure seal width shall be a minimum 1/8 inch for conventional heat seals or a minimum 1.0 mm for ultrasonic seals.
The pouches shall be filled and hermetically sealed such that after thermal processing, the pouches shall withstand an internal pressure of 10 psig for 30 s...
Typical award value
No award history yet for this category (NAICS 311422).
Timeline
-
Posted
Nov 19, 2026
-
Status
Open now
How to bid on this
This is a contract solicitation, not a grant. To bid, you submit a proposal (usually a price and a description of how you would do the work) directly to the government, through the channel the official listing specifies, not through Oppward.
- Make sure your business has an active SAM.gov registration. You cannot be paid on a federal contract without one.
- Read the full solicitation on the official listing above, especially the scope of work, not just this summary. Our guide to reading a solicitation walks through what to look for.
- This listing has no set-aside restriction ("full and open competition"), meaning any business, large or small, can bid.
- Submit your proposal by the deadline, using the exact submission method the official listing states. A technically on-time bid sent the wrong way is often treated as late.
Get contracts like this one matched to your business, free.