Contract · Federal
DEW POINT INDICATOR, MODEL: HLI 9000 MKIV
DEPT OF DEFENSE / DEFENSE LOGISTICS AGENCY Portsmouth, VA
- Status Closes in 4 days
- Amount Amount not listed
- Set-aside Small Business Set Aside - Total
Scope
PLEASE FILL OUT ATTACHMENT AND RETURN WITH OFFER • HLI 9000 MK IV With the following configuration: ?
Measurement accuracy: ±2°C from -60° to +20° dew point. ?
Measurement Range: -60° to +20° dew point. ?
Measurement units: °F, °C, °K for dew point and gas temperature. ppmv, ppmw for air, N2, H2, CO2, SF6, %RH, g/m3, g/kg. ?
Resolution (display): 0.1 for all dew-point derived units and auto ranging where appropriate ( e.g. ppm). ?
Resolution (measurement): 0.01 ° C (0.02° F) dew point. ?
Measurement system repeatability: Better than 0.1 ° C (0.18° F). ?
Measurement system stability: 0.1° C (0.18° F). ?
Measurement system hysteresis: 0.05° C (0.09° F). ?
Electrical input/output: • Power supply: 115 V AC power to recharge the internal battery. ?
Operating conditions: • Operating Environment: Outdoors, 0 to + 100% RH condensing; -20° to + 50°C (-4° to+ 122° F). • Storage/fransport Temperature: -40° to +70° C (-40° to+ 158° F). • Operating Pressure Range: 5000 psig for internal sensor, higher pressures with external sampling ?
Mechanical specifications: • Display: Blue LCD graphical display. • Enclosure type: Aluminum. • Gas connections: Compatible with existing shipboard installed sample ports; other options available. • Flow across sensor: 1 to 9.4 nlpm (2 to 20 scfb). • Filter: 40 micron stainless steel sinter in the inlet port. • Gas wetted materials: AISI 316L stainless steel. • Outline dimensions: 17 3/16 in x 12 5/32 in x 6 7/32 in (437 mm x 309 mm x 158 mm). • Weight: Hygrometer: <6.6 lb (3 kg). ?
User Manual English systems.
Typical award value
No award history yet for this category (NAICS 333248).
Timeline
-
Posted
Nov 19, 2026
-
Status
Closing soon
How to bid on this
This is a contract solicitation, not a grant. To bid, you submit a proposal (usually a price and a description of how you would do the work) directly to the government, through the channel the official listing specifies, not through Oppward.
- Make sure your business has an active SAM.gov registration. You cannot be paid on a federal contract without one.
- Read the full solicitation on the official listing above, especially the scope of work, not just this summary. Our guide to reading a solicitation walks through what to look for.
- Check the set-aside listed above and confirm your business actually qualifies for it before you spend time on a proposal. See our guide to set-asides if the category is unfamiliar.
- Submit your proposal by the deadline, using the exact submission method the official listing states. A technically on-time bid sent the wrong way is often treated as late.
Get contracts like this one matched to your business, free.