Contract · Federal

Replacement TAO Wind Monitors for the National Data Buoy Center at Stennis Space Center, MS

COMMERCE, DEPARTMENT OF / NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION Stennis Space Center, MS

  • Status Closes in 14 days
  • Amount Amount not listed
  • Set-aside No Set aside used

Scope

The National Oceanic and Atmospheric Administration’s (NOAA) Acquisition and Grants Office, Eastern Acquisition Division-Kansas City intends to negotiate and award a purchase order, on a sole source basis, under authority of RFO FAR 6.103-1, with RM Young Company for Replacement TAO Wind Monitors (P/N 05103-1) to be delivered to National Data Buoy Center at Stennis Space Center, MS.

The sole source determination is based on NOAA’s only one source is capable rationale.

The RM Young propeller wind monitors technology uses magnetic induction for measuring wind speed which requires no energy input.

Essentially you get the wind speed for free with respect to power requirements.

Further, the directional portion of the sensor only requires 0.6 mW of power.

That is 100 times less power requirement than an ultrasonic anemometer.

This low power wind measurement is imperative in a battery-operated remote buoy station.

The propeller anemometer also provides for the measurement of wind gusts over 100 m/s where no ultrasonic anemometer technology can currently measure in that range.

The NDBC helped develop the R.M.

Young propeller anemometer which is now considered the industry standard.

No other propeller anemometer available has the reliability of the R.M.

Young propeller anemometer.

Hence, the R.M.

Young model 05103-1 anemometer was selected as the anemometer for the TAO refresh system in 2010 and the TAP Recapitalization effort in 2023.

The NDBC now has a complete TAO network populated with these 015103-1 wind monitors and this procurement replaces those units lost at sea, damaged beyond repair, or have reached their end of life during fiscal years 2025 and 2026.

The RM Young 05103-1 is provided with the cable and connector required to match current TAO cabling.

The 05103-1 also provides a pulse...

Typical award value

No award history yet for this category (NAICS 334519).

Timeline

  1. Posted

    Nov 18, 2026

  2. Status

    Closing soon

How to bid on this

This is a contract solicitation, not a grant. To bid, you submit a proposal (usually a price and a description of how you would do the work) directly to the government, through the channel the official listing specifies, not through Oppward.

  1. Make sure your business has an active SAM.gov registration. You cannot be paid on a federal contract without one.
  2. Read the full solicitation on the official listing above, especially the scope of work, not just this summary. Our guide to reading a solicitation walks through what to look for.
  3. Check the set-aside listed above and confirm your business actually qualifies for it before you spend time on a proposal. See our guide to set-asides if the category is unfamiliar.
  4. Submit your proposal by the deadline, using the exact submission method the official listing states. A technically on-time bid sent the wrong way is often treated as late.

Get contracts like this one matched to your business, free.