Contract · Federal

USCGC MORRO BAY (WTGB-108) — Fuel Oil Tanks and Bilge Cleaning and Inspection

HOMELAND SECURITY, DEPARTMENT OF / US COAST GUARD Alameda, OH

  • Status Closes in 4 days
  • Amount Amount not listed
  • Set-aside No Set aside used

Scope

The U.S.

Coast Guard has a requirement for a qualified contractor to furnish all labor, supervision, materials, equipment, vacuum trucks, and hoses to perform fuel oil tank and bilge cleaning services aboard the USCGC MORRO BAY (WTGB-108) in Cleveland, OH.

Bilge Cleaning: Vacuum offload approximately 2,500 gallons of mixed fluid (used engine oil, fuel, and bilge water).

Thoroughly wash and degrease bilges to meet USCG-provided Marine Chemist gas-free/safe-for-hot-work inspection standards.

Fuel Oil (F/O) Tank Cleaning & Fuel Disposal: Pump low-suction residue and dispose of approximately 11,500 gallons of contaminated Marine Gas Oil (MGO) / diesel fuel.

Clean all internal tank surfaces free of residual fuel, sludge, biological growth, and foreign matter.

Continuous media extraction and lint-free wipe-down required (per drawings 140 WTGB 116-001, 140-003, 120-001, and 149-001).

Tank Inspection & Closure: Verify Tank Level Indicator (TLI) system operation and removal of all pipe plugs prior to entry and closure.

Secure manhole covers in the presence of the Coast Guard Inspector using new AMS-C-6183 compliant gaskets, chasing stud threads, and renewing damaged nuts.

Environmental & Waste Documentation: Provide full chain-of-custody documentation and signed Uniform Hazardous Waste Manifest(s) within two (2) calendar days of work completion.

2.

Period & Place of Performance Location: USCGC MORRO BAY, 1055 East 9th Street, Cleveland, OH 44114.

Performance Window: 20 November 2026 through 01 December 2026.

Preferred Start: 20 November 2026 at 08:30 EST.

On-Site Cap: Not to exceed three (3) consecutive calendar days.

Holiday: Thanksgiving Day (26 November 2026) is an official non-work day.

3.

Mandatory Contractor Qualifications & Equipment Offerors must demonstrate and provide proof of the foll...

Typical award value

No award history yet for this category (NAICS 562998).

Timeline

  1. Posted

    Nov 13, 2026

  2. Status

    Closing soon

How to bid on this

This is a contract solicitation, not a grant. To bid, you submit a proposal (usually a price and a description of how you would do the work) directly to the government, through the channel the official listing specifies, not through Oppward.

  1. Make sure your business has an active SAM.gov registration. You cannot be paid on a federal contract without one.
  2. Read the full solicitation on the official listing above, especially the scope of work, not just this summary. Our guide to reading a solicitation walks through what to look for.
  3. Check the set-aside listed above and confirm your business actually qualifies for it before you spend time on a proposal. See our guide to set-asides if the category is unfamiliar.
  4. Submit your proposal by the deadline, using the exact submission method the official listing states. A technically on-time bid sent the wrong way is often treated as late.

Get contracts like this one matched to your business, free.