Contract · Federal
Pneumatic Hoist
DEPT OF DEFENSE / DEPT OF THE ARMY FORT DRUM, NY
- Status Closes in 6 days
- Amount Amount not listed
- Set-aside Small Business Set Aside - Total
Scope
Salient CharacteristicsItem: Pneumatic Chain Hoist Assembly, Lug-Mounted.Brand Name or Equal To.
Cisco-Eagle SKU TCRP-1627048 reference model TCRP2000P2.Quantity 2 eaches.1.
Required Function.
The contractor shall furnish one new, complete, commercially available pneumatically chain hoist assembly for lifting and vertically positioning loads in an overhead lifting application.
The offered item shall be fully functional upon delivery and include all components identified below that are necessary for normal operation.2.
Mandatory Salient Characteristics.
The offered hoist assembly shall meet all of the following minimum requirements:CHARACTERISTIC.
MINIMUN GOVERNMENT REQUIREMENTType.
Pneumatically powered chain hoist assembly.Rated lifting capacity.
Minimum rated capacity of 2 short tons i.e.
4,000 lb.Lift height.
Minimum 10 foot vertical lift.Mounting configuration.
Lug mounted configuration.Bottom hook.
Furnished with a standard bottom hook suitable for the offered hoist???s rated capacity.Pendant control.
Furnished with a pendant control.
Pendant length shall be 7.5 feet, measured from the hoist, control connection point to the pendant control, or equivalent length necessary to provide the same operating reach.Chain container.
Furnished with a canvas chain container sized to safely contain the full length of load chain associated with the required 10 foot lift.Structural, track interface.
The assembly shall be compatible with the Government???s existing flange, track interface identified as a 4 inch flange configuration with an applicable flange range of 3.23 inches through 6.02 inches.
The vendor shall identify the specific mounting/trolley/interface dimensions of the offered item and certify compatibility with this requirement.Condition.
New.
Current-production equipment; used, refurbis...
Typical award value
No award history yet for this category (NAICS 333923).
Timeline
-
Posted
Nov 6, 2026
-
Status
Closing soon
How to bid on this
This is a contract solicitation, not a grant. To bid, you submit a proposal (usually a price and a description of how you would do the work) directly to the government, through the channel the official listing specifies, not through Oppward.
- Make sure your business has an active SAM.gov registration. You cannot be paid on a federal contract without one.
- Read the full solicitation on the official listing above, especially the scope of work, not just this summary. Our guide to reading a solicitation walks through what to look for.
- Check the set-aside listed above and confirm your business actually qualifies for it before you spend time on a proposal. See our guide to set-asides if the category is unfamiliar.
- Submit your proposal by the deadline, using the exact submission method the official listing states. A technically on-time bid sent the wrong way is often treated as late.
Get contracts like this one matched to your business, free.