Contract · Federal
FCC Lompoc B&F Project 25Z6AXX Emergency Fire Escape Doors
JUSTICE, DEPARTMENT OF / FEDERAL PRISON SYSTEM / BUREAU OF PRISONS LOMPOC, CA
- Status Closes in 9 days
- Amount Amount not listed
- Set-aside Small Business Set Aside - Total
Scope
STATEMENT OF WORK / REQUEST FOR QUOTE A.
INTRODUCTION: 1.
The Federal Bureau of Prisons (FBOP), FCC Lompoc, 3901 Klein Blvd., Lompoc, CA 93436, is seeking quotes from qualified vendors for the supply and delivery of nine (9) complete fire escape door assemblies, including doors, frames, and all required hardware.
The doors are for a prison facility application and must meet all relevant local, state, and federal fire and life safety codes.
2. "Equal or Better" Product Substitution: Proposals must meet or exceed the specified product quality.
If an alternative product or component is offered, the vendor must submit all technical documentation, certifications, and test results for consideration.
3.
Government's Right of Final Technical Acceptance: The government retains the sole and final authority to determine technical acceptance for all submitted products, based on the provided documentation and compliance with stated standards.
B.
SCOPE OF WORK: 1.
The vendor shall provide all materials as specified below.
All components must be new, U.L.
Listed or labeled by a recognized testing agency acceptable to the Authority Having Jurisdiction (AHJ) and conform to the standards referenced herein.
C.
TECHNICAL SPECIFICATIONS: TABLE 1: COMPONENTS: All units shall be identical unless otherwise noted.
Component Requirement Quantity 9 Complete Door Assemblies Door Size 36" wide x 80" high x 2" thick Door Material Hollow Metal Door, minimum 12 Gauge galvanneal steel Core Ribbed and Insulated (mineral core for fire rating is acceptable/preferred) Fire Rating Rating must be compatible with the wall's fire resistance rating, typically 75% of the wall's rating.
See required fire rating for correctional facilities on Table 2 Handing 4 Left Hand Outswing, 5 Right Hand Outswing.
Frame Material Minimum 12 Ga...
Typical award value
No award history yet for this category (NAICS 332321).
Timeline
-
Posted
Nov 5, 2026
-
Status
Closing soon
How to bid on this
This is a contract solicitation, not a grant. To bid, you submit a proposal (usually a price and a description of how you would do the work) directly to the government, through the channel the official listing specifies, not through Oppward.
- Make sure your business has an active SAM.gov registration. You cannot be paid on a federal contract without one.
- Read the full solicitation on the official listing above, especially the scope of work, not just this summary. Our guide to reading a solicitation walks through what to look for.
- Check the set-aside listed above and confirm your business actually qualifies for it before you spend time on a proposal. See our guide to set-asides if the category is unfamiliar.
- Submit your proposal by the deadline, using the exact submission method the official listing states. A technically on-time bid sent the wrong way is often treated as late.
Get contracts like this one matched to your business, free.