Contract · Federal
CBRND Seeking Aircraft Interior Decontamination Technology
DEPT OF DEFENSE / DEPT OF THE ARMY Abell, MD
- Status Closes in 27 days
- Amount Amount not listed
- Set-aside No Set aside used
Scope
The Department of War (DoW), Portfolio Management Executive for Chemical, Biological, Radiological and Nuclear Defense (PME CBRND), Joint Project Manager for CBRN Special Operations Forces (JPM CBRN SOF) is seeking information, design concepts, and mature technology capabilities for a Tactical Aircraft Interior Decontamination Dispersal System.
The goal of this initiative is to identify or evaluate a mature, rapidly deployable, and highly reliable hardware applicator system capable of delivering fine-aerosol, dry-fog, or gaseous decontaminants uniformly throughout military aircraft interiors without damaging sensitive electronics.
Key Technical Parameters & Scope: Dispersal Mechanics: Must disperse a fine aerosol/dry fog with a Volume Median Diameter (VMD) of less than 10 microns (Threshold) or a gas-phase molecular dispersion less than 0.001 microns (Objective) to maximize surface coverage without wetting, pooling, or dripping.
Tactical Mobility & Footprint: Must fit securely within a Polaris MRZR cargo bed with a stowed envelope not exceeding 42" H x 18" D x 18" W (Threshold), with a target envelope under 30" H x 14" D x 16" W (Objective) to allow upright walk-through clearance in CH-47 and CV-22 cabins.
System Weight: Empty chassis weight must be ?
150 lbs (Threshold) for a 4-man lift, with a target empty weight of ?
100 lbs (Objective) for a 2-man lift.
Fully loaded weight with maximum consumables must not exceed 500 lbs.
Power Flexibility: Operable from standard single-phase 110-120 VAC (50/60 Hz), commercial/tactical generators ?
6 kW, or vehicle auxiliary 28 VDC (Threshold), with a target capability to interface directly with utility and flight-line power IAW MIL-STD-704 (Objective).
Employment Versatility: Must support two primary delivery modes: Internal cabin placement...
Timeline
-
Posted
Oct 27, 2026
-
Status
Open now
How to bid on this
This is a contract solicitation, not a grant. To bid, you submit a proposal (usually a price and a description of how you would do the work) directly to the government, through the channel the official listing specifies, not through Oppward.
- Make sure your business has an active SAM.gov registration. You cannot be paid on a federal contract without one.
- Read the full solicitation on the official listing above, especially the scope of work, not just this summary. Our guide to reading a solicitation walks through what to look for.
- Check the set-aside listed above and confirm your business actually qualifies for it before you spend time on a proposal. See our guide to set-asides if the category is unfamiliar.
- Submit your proposal by the deadline, using the exact submission method the official listing states. A technically on-time bid sent the wrong way is often treated as late.
Get contracts like this one matched to your business, free.