Ammonia-Assisted Regeneration for Longer-Lasting Direct Air Capture (DAC)

Scope

Every direct air capture (DAC) system depends on its sorbent, and every sorbent eventually wears out.

This DAC from Los Alamos National Laboratory tackles that weakness head-on.

It replaces the harsh release step with a gentler, ammonia-assisted process, which shields amine-based sorbents from the degradation that drives up operating costs.

The method works with a broad family of established sorbent materials and support structures, so developers can build it into existing capture designs rather than starting over.

Challenges Direct air capture is a two-step cycle: a sorbent captures CO2 from the air, then releases it as a concentrated stream.

Liquid sorbents need expensive equipment and a lot of energy, more than 400 kJ of work per mole of CO2.

Amine-based solid sorbents capture more CO2, regenerate at about 120°C and even perform better in humid air.

Their weakness is durability.

At release temperatures of 80°C and above, oxygen reacts with the amines to form free radicals and the amines can evaporate.

Both effects wear the sorbent down over repeated cycles.

Replacing sorbent drives up the overall cost of direct air capture and stands in the way of large-scale deployment.

Problems Solved DAC changes how the sorbent gives up its captured carbon.

First, the sorbent absorbs CO2 from ambient air at ordinary outdoor temperatures and pressures.

Then, instead of relying on the conventional release step that damages the material, the method exposes the loaded sorbent to ammonia gas, which prompts it to release the CO2.

Regeneration takes place at 75–120°C under reduced pressure (20–600 mbar), and the released CO2 can then be stored.

The method is designed to prevent sorbent degradation and erosion.

The application sets performance goals ranging from at least 50% of original capacity after fi...