Contract · Federal
Debris Boom Supply and Install at Harry S. Truman Lake Project
DEPT OF DEFENSE / DEPT OF THE ARMY Warsaw, MO
- Status Closes in 4 days
- Amount Amount not listed
- Set-aside No Set aside used
Scope
The purpose of the debris boom is to prevent floating debris from impacting the dam's tainter gates, which is crucial for maintaining the full operational capacity of the spillway.
The boom will also serve as a visual barrier to boaters.
The Contractor shall provide all labor, materials, equipment, engineering, fabrication, delivery, and optional installation necessary to furnish a complete debris boom system at Harry S.
Truman Dam.
The approximately 2,000-foot boom shall be designed to intercept floating debris upstream of the spillway and withstand site-specific hydraulic, wind, wave, debris, and impact loading conditions.
The debris boom shall be designed for an 800-foot-long by 3-foot-thick debris field, use a minimum safety factor of 2.0 for design loads, withstand a direct head-on impact from an 18-inch-diameter, 100-foot-long log traveling at the maximum design water velocity, and withstand design conditions including 50 mph wind speed and 5-foot wave height.
This acquisition is not set-aside for small business concerns and is competed as full and open competition, Unrestricted.
An organized site visit has been scheduled for: Friday, 9 October 2026 at 11am.
Typical award value
No award history yet for this category (NAICS 332312).
Timeline
-
Posted
Sep 28, 2026
-
Listing updated
Oct 20, 2026
-
Status
Closing soon
How to bid on this
This is a contract solicitation, not a grant. To bid, you submit a proposal (usually a price and a description of how you would do the work) directly to the government, through the channel the official listing specifies, not through Oppward.
- Make sure your business has an active SAM.gov registration. You cannot be paid on a federal contract without one.
- Read the full solicitation on the official listing above, especially the scope of work, not just this summary. Our guide to reading a solicitation walks through what to look for.
- Check the set-aside listed above and confirm your business actually qualifies for it before you spend time on a proposal. See our guide to set-asides if the category is unfamiliar.
- Submit your proposal by the deadline, using the exact submission method the official listing states. A technically on-time bid sent the wrong way is often treated as late.
Get contracts like this one matched to your business, free.