Contract · Federal · Small Business Set Aside - Total

15 Foot offset flex arm for Bat Wing mowers

Agency: DEPT OF DEFENSE / DEPT OF THE ARMY
Location: FORT DRUM, NY
Amount: Amount not listed
Posted: Sep 9, 2026
Set-aside: Small Business Set Aside - Total
NAICS code: 333618 look up NAICS codes
PSC code: 3590

Timeline

Posted

Sep 9, 2026
Status

Closing soon

What contracts like this typically pay

No award history yet for this category (NAICS 333618).

What this contract is for

Agency: DEPT OF DEFENSE / DEPT OF THE ARMY
Location: FORT DRUM, NY
Set-aside: Small Business Set Aside - Total
NAICS: 333618
Scope: Federal

The 15-foot offset flex arm rotary cutter requires heavy-duty 11L by 15, 12-ply tires with a minimum load capacity of 4,000 pounds.

It must be capable of cutting directly in-line with the tractor or at any offset distance up to 122 inches (10.16 feet).

The assembly requires a minimum two-and-a-half-inch castor pivot shaft, six-bolt hubs with at least a 6,000-pound capacity, and bolt-in replaceable axles.

Major pivot points must utilize spring steel tension bushings and induction-hardened pins.

Hydraulic and mechanical requirements include a minimum of four hydraulic circuits with independent wing lift for the 15-foot mower, a heavy-duty three-and-a-half by 36-inch welded hydraulic cylinder, and an optional six-port selector valve kit for independent wing action on tractors with limited hydraulic outlets.

Power delivery requires a minimum rating of 200 horsepower at 1,000 RPM while accommodating 540 RPM power delivery from the tractor.

A safety lighting kit is also required.

Standard travel dimensions must maintain a maximum width of 70 inches to the left of the tractor and 52 inches to the right, totaling 121 inches for the arm and rotary cutter assembly.

When operating with the stop block installed on the transport lock bar designed to improve clearance for oncoming traffic on narrow roads the dimensions are configured to 55 inches to the left of the tractor and 66 inches to the right (totaling 121 inches).

Official solicitation and documents

The full solicitation, any attachments, and the actual submission instructions live on the official listing, not on this page. Oppward summarizes public record data; it does not host or mirror the source documents.

View the official listing on SAM.gov

Oppward is an independent service and is not affiliated with, endorsed by, or sponsored by SAM.gov or any government agency. This page is a plain-English summary of public record data; the linked source above is the authoritative listing.

How to bid on this

This is a contract solicitation, not a grant. To bid, you submit a proposal (usually a price and a description of how you would do the work) directly to the government, through the channel the official listing specifies, not through Oppward.

Make sure your business has an active SAM.gov registration. You cannot be paid on a federal contract without one.
Read the full solicitation on the official listing above, especially the scope of work, not just this summary. Our guide to reading a solicitation walks through what to look for.
Check the set-aside listed above and confirm your business actually qualifies for it before you spend time on a proposal. See our guide to set-asides if the category is unfamiliar.
Submit your proposal by the deadline, using the exact submission method the official listing states. A technically on-time bid sent the wrong way is often treated as late.