Contract · No Set aside used

CONDENSER, REFRIGERATOR, KIT

Agency: HOMELAND SECURITY, DEPARTMENT OF / US COAST GUARD
Location: NORFOLK, VA
Amount: Amount not listed
Deadline: Closes in 4 days (Jul 22, 2026)
Posted: Jul 17, 2026
Set-aside: No Set aside used
NAICS code: 333415

What this contract is for

The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following part: Item 1) NSN: 4130-01-540-2113 ITEM NAME: CONDENSER, REFRIGERATION, KIT OEM PN: 90C02-1182-44 MFG: CARRIER TRANSICOLD CO. QTY: 5 EA DESCRIPTIVE/SPEC DATA: CONDENSER, REFRIGERATION. KETEMA MHX SEAWATER CONDENSER. SHELL AND TUBE TYPE. OVERALL LENGTH 69.000 INCHES NOMINAL; OVERALL WIDTH 13.750 INCHES NOMINAL; FLOW RATE 25 TONS PER HOUR; 2 PASS, 3 INCH NPT, WATER TYPE, 60 TUBES, WT-480 LBS. OLD KETEMA CONDENSER PART NUMBER: MHX-1005A-2 (FOR R-410A). THIS NEW CONDENSER HAS A HIGHER MAX ALLOWABLE WORKING PRESSURE FROM 450 PSI MAWP TO 600 PSI MAWP. F/F/F REMAINS THE SAME. APL 04108550A8 CONDENSER, 25 TON. TP 3965-514-A. APPLICATION: AIR CONDITIONING SYSTEM, CIRCUIT A. EACH CONDENSER SHALL BE INDIVIDUALLY PACKAGED AND LABELED. PACKAGING REQUIREMENTS: CONDENSER PORT OPENINGS SHALL HAVE PLASTIC CAPS INSTALLED. EACH ACCUMULATOR SHALL BE INDIVIDUALLY PACKAGED IN ITS OWN FULLY ENCLOSED WOODEN CONTAINER. CONTAINER SHALL BE OF A SKID BASE TYPE WITH AN ENCLOSURE CONSISTING OF FOUR SIDES AND TOP THAT ATTACHES TO THE SKID AND ASSEMBLED WITH STAINLESS STEEL WOOD SCREWS. THE CONDENSER SHALL BE MOUNTED TO THE SKID TO PREVENT THE CONDENSER FROM SHIFTING. CONTAINER SHALL BE CAPABLE OF PROTECTING THE CONDENSER FROM DAMAGE DURING MULTIPLE SHIPMENTS BY COMMERCIAL CARRIER. *****DO NOT SUBMIT QUOTE IF YOU CANNOT MEET THE PACKAGING REQUIREMENTS WITHIN THIS SOLICITATION. STANDARD COMMERCIAL PACKAGING IS UNACCEPTABLE - IF YOU CANNOT MEET THE COAST GUARDS PACKAGING REQUIREMENTS YOUR QUOTE WILL NOT BE ACCEPTED. ***** Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, 2401 Hawkins Point Road, Baltimore MD 21126, Mark for: Receiving Room Bldg. 88. Thi...

View the official listing on SAM.gov

Oppward is an independent service and is not affiliated with, endorsed by, or sponsored by SAM.gov or any government agency. This page is a plain-English summary of public record data; the linked source above is the authoritative listing.

How to bid on this

This is a contract solicitation, not a grant. To bid, you submit a proposal (usually a price and a description of how you would do the work) directly to the government, through the channel the official listing specifies, not through Oppward.

Make sure your business has an active SAM.gov registration. You cannot be paid on a federal contract without one.
Read the full solicitation on the official listing above, especially the scope of work, not just this summary. Our guide to reading a solicitation walks through what to look for.
Check the set-aside listed above and confirm your business actually qualifies for it before you spend time on a proposal. See our guide to set-asides if the category is unfamiliar.
Submit your proposal by the deadline, using the exact submission method the official listing states. A technically on-time bid sent the wrong way is often treated as late.