Contract · Federal · No Set aside used

Single-Axis Linear Motion Calibration System (Shake Table) with Control Software

Agency: HEALTH AND HUMAN SERVICES, DEPARTMENT OF / FOOD AND DRUG ADMINISTRATION
Location: Silver Spring, MD
Amount: Amount not listed
Posted: Jul 20, 2026
Set-aside: No Set aside used
NAICS code: 334519 look up NAICS codes
PSC code: 6625

Timeline

Posted

Jul 20, 2026
Status

Closing soon

What contracts like this typically pay

No award history yet for this category (NAICS 334519).

What this contract is for

Agency: HEALTH AND HUMAN SERVICES, DEPARTMENT OF / FOOD AND DRUG ADMINISTRATION
Location: Silver Spring, MD
Set-aside: No Set aside used
NAICS: 334519
Scope: Federal

The U.S.

Food and Drug Administration requires one (1) complete, turnkey single-axis (one degree-of-freedom) linear motion calibration system, commonly described as a shake table, with control software, for laboratory calibration, verification, and validation testing of inertial measurement devices.

The system shall be fully assembled, factory-tested, and factory-calibrated prior to shipment, requiring only unpacking, cable connection, and software installation by the end user.

The Government seeks sources able to provide a system meeting, at minimum, the following salient performance characteristics.

These are stated in approximate terms for market research; the full minimum specification will accompany any resulting solicitation. • Programmable single-axis linear motion under closed-loop position control with real-time feedback, capable of arbitrary user-defined waveforms including multi-frequency superposition of at least three simultaneous components.

Pre-programmed, fixed-routine-only calibrators are not sought. • A motion envelope on the order of 0.1 to 10 Hz in frequency, sub-millimeter to approximately twenty millimeters in displacement, and up to approximately one g in acceleration, with demonstrated small-amplitude positioning accuracy at the sub-millimeter level. • An integrated position sensor and an integrated reference accelerometer, each factory calibrated with NIST-traceable certificates. • Safety features including a hard-wired emergency stop, motion limits, over-current protection, and fault detection with automatic safe shutdown. • Benchtop form factor suitable for standard laboratory power (110 to 120V, or universal input) without special power conditioning or floor reinforcement. • Control software operable in a standalone configuration with no required...

Official solicitation and documents

The full solicitation, any attachments, and the actual submission instructions live on the official listing, not on this page. Oppward summarizes public record data; it does not host or mirror the source documents.

View the official listing on SAM.gov

Oppward is an independent service and is not affiliated with, endorsed by, or sponsored by SAM.gov or any government agency. This page is a plain-English summary of public record data; the linked source above is the authoritative listing.

How to bid on this

This is a contract solicitation, not a grant. To bid, you submit a proposal (usually a price and a description of how you would do the work) directly to the government, through the channel the official listing specifies, not through Oppward.

Make sure your business has an active SAM.gov registration. You cannot be paid on a federal contract without one.
Read the full solicitation on the official listing above, especially the scope of work, not just this summary. Our guide to reading a solicitation walks through what to look for.
Check the set-aside listed above and confirm your business actually qualifies for it before you spend time on a proposal. See our guide to set-asides if the category is unfamiliar.
Submit your proposal by the deadline, using the exact submission method the official listing states. A technically on-time bid sent the wrong way is often treated as late.

Read our guide: Government IT and software contracts: how they work