Contract · Federal · No Set aside used

CGC KUKUI DRYDOCK

Agency: HOMELAND SECURITY, DEPARTMENT OF / US COAST GUARD
Location: ALAMEDA, CA
Amount: Amount not listed
Posted: Jul 23, 2026
Set-aside: No Set aside used
NAICS code: 336611 look up NAICS codes
PSC code: J999

Timeline

Posted

Jul 23, 2026
Status

Closing soon

What contracts like this typically pay

No award history yet for this category (NAICS 336611).

What this contract is for

Agency: HOMELAND SECURITY, DEPARTMENT OF / US COAST GUARD
Location: ALAMEDA, CA
Set-aside: No Set aside used
NAICS: 336611
Scope: Federal

Sources Sought Title: USCGC KUKUI (WLB 203) DRYDOCK (DD) Repairs The U.S.

Coast Guard is looking for sources which would be interested in performing Drydock repairs for Coast Guard Cutter KUKUI (WLB 203).

USCGC KUKUI (WLB 203) is a 225-foot Seagoing Buoy Tender USCGC KUKUI HOMEPORT ADDRESS: 1480 Seward Avenue, Sitka, AK.

99835 ANTICIPATED PERIOD OF PERFORMANCE: 02 February 2027 to 18 May 2027. (Subject to change) DISTRICT 17- ALASKA: This requirement is for a vessel that is homeported in Coast Guard District 17 Alaska.

This requirement will be in accordance with NDAA FY 2021 Section 8820, Shipyard Provision, Section 8220, VESSEL CONVERSION, ALTERATION, AND REPAIR PROJECTS.

However, offers may be considered from vendors outside of District 17 PLACE OF PERFORMANCE: Contractors Facility The scope of this acquisition is for the drydock repairs of various work items for USCGC KUKUI.

The work will include, but is not limited to: WORK ITEM 1: Fire Prevention Requirements WORK ITEM 2: Hull Plating, Side Scan, Ultrasonic Testing WORK ITEM 3: Hull Plating, U/W Body, Inspect WORK ITEM 4: Hull Plating, U/W Body, Ultrasonic Testing WORK ITEM 5: U/W Body, Preserve, 100 percent WORK ITEM 6: Hull Plating Freeboard, Preserve, Partial WORK ITEM 7: Appendages, U/W, Leak Test WORK ITEM 8: Propulsion Shaft Fairwaters And Rope Guards, Inspect WORK ITEM 9: Appendages, U/W, Internal, Preserve WORK ITEM 10: Chain Lockers, Clean and Inspect WORK ITEM 11: Voids, Non-Accessible, Leak Test WORK ITEM 12: Voids, Non-Accessible, Internal Surfaces, Preserve WORK ITEM 13: Tanks, Ballast, Clean and Inspect WORK ITEM 14: Tanks, Dirty Oil and Waste, Clean and Inspect WORK ITEM 15: Main Reduction Gear, Overhaul WORK ITEM 16: Stern Tube Interior Surfaces, Preserve, 100 Percent WORK ITEM 17: Heat Exchangers, Clean,...

Official solicitation and documents

The full solicitation, any attachments, and the actual submission instructions live on the official listing, not on this page. Oppward summarizes public record data; it does not host or mirror the source documents.

View the official listing on SAM.gov

Oppward is an independent service and is not affiliated with, endorsed by, or sponsored by SAM.gov or any government agency. This page is a plain-English summary of public record data; the linked source above is the authoritative listing.

How to bid on this

This is a contract solicitation, not a grant. To bid, you submit a proposal (usually a price and a description of how you would do the work) directly to the government, through the channel the official listing specifies, not through Oppward.

Make sure your business has an active SAM.gov registration. You cannot be paid on a federal contract without one.
Read the full solicitation on the official listing above, especially the scope of work, not just this summary. Our guide to reading a solicitation walks through what to look for.
Check the set-aside listed above and confirm your business actually qualifies for it before you spend time on a proposal. See our guide to set-asides if the category is unfamiliar.
Submit your proposal by the deadline, using the exact submission method the official listing states. A technically on-time bid sent the wrong way is often treated as late.